These replacement brake pads are designed specifically for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Carbon fiber rim construction and design are only part of the solution to solving the heat equation. Brake pads play an integral role in ride performance and long-term durability of the wheel.

•Mountain and road touring cantilever design •Forged aluminum construction •Linear spring with quick tool adjust •185g each

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

Shimano XT RT86 6-Bolt Disc Rotor - 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors - Aluminum spider - Includes rotor fixing bolts and non-turn washers - Hub/Disc Compatibility: 6-Bolt Disc - Weight: 173 g - Rotor Size (mm): 203 mm - Rotor Type: Two Piece - Pad Compatibility: All Pad Compounds

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management - Hub Compatibility: Center Lock - Disc Material: Steel

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

•Compatible with most road caliper brakes •All weather compound •Includes one extra set of pads

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts

Deore XT M8100 hydraulic disc brakes are designed to provide high-performance braking for a variety of MTB riding styles. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8120 4-piston caliper is designed for tough enduro trails - Set includes brake lever, caliper, finned metal pads, and hose - Brakes are pre-bled for convenient setup

Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

Shimano Deore XT SM-RT86 6-Bolt rotors feature a 3-layer construction with an aluminum core and two stainless steel outer layers. Reducing rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors, the result is better braking performance and reduced brake fade. - Aluminum spider - Includes rotor fixing bolts and locking washers

With quicker brake engagement and shorter free stroke, the Shimano Deore BR-M6100 brake set delivers intuitive braking so you can stay focused on the trail ahead. The I-Spec EV shift lever offers a wider adjustment range for superior rider tuning. - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-Spec EV shifting lever - Lever/caliper sets sold individually for front or rear.

Simple, economical threadless post mount caliper brake pads. - Rubber compound improves performance over many OE pads

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

TRP’s new slotted rotor is designed for the most demanding riders in the most demanding conditions. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Single piece design for weight savings - Weight: 117g (160mm)

- High performance compound recommended for all-conditions - Alloy backing plate: 50% lighter than steel backing plate

- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor - Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors - Designed for up to 210mm rotors - Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter - Lockring requires a 16-notch external bearing bottom bracket wrench - CL-IS adapter is black and lockring is black with silver etching: 29g

Brass hose insert for Hope hydraulic disc brakes.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Fit a variety of Magura brakes and offer industry leading brake compounds for consistent, confident performance - Organic pad for Magura 4-piston brake calipers

• DIN standard design with anti-corrosion hardware • All weather compound • Offset post

Brass compression olive for Hope hydraulic disc brakes.

Double your braking options with Sunlite's Type 1 Top-Mount Cross Levers. They fit neatly on top of your bars and they're a great way to gain more control on technical cyclocross courses and everywhere else you choose to ride. They're made of aluminum and boast a built-in reach adjustment.

Jagwire's Mountain Sport Disc Brake Pads (Tektro) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Improve your braking in dry and wet conditions with Origin-8's Pro-Force Post Pad Set. They fit most cantilever brakes and boast a grippy dual-compound material with channels to shed water for excellent performance and long life. They are also designed to reduce noise.

Road? Gravel? Where ever your ride takes you, TRP’s RG957 will be there. The long reach allows plenty of room for larger tires and fenders. Forged from 6061-T6 aluminum, TRP alloy rim cartridge brake pads, adjustable pad holders, Teflon® bushings and stainless steel hardware give this brake great performance with an exceptional value. SPECIFICATIONS - RG957 - Long reach dual pivot caliper brakes - TRP alloy brake pads - Forged 6061-T6 aluminum arms - In-place adjustable CNC road cartridge pad holders - Cam Style Quick Release - Stainless steel hardware - Spring tension adjustment - Color: Black, Grey, or Silver - Reach: 47-57mm - Weight: 167 grams per caliper - Maximum Rim Width: 28mm - Sold as Pair (front and rear)

Shimano XT RT81 Centerlock Disc Rotors - 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors - Aluminum spider - Includes standard type rotor lockring - Requires external-type rotor lockring when installing onto 15/20mm axle hub